Ritron " 6 " SERIES OUTPOST Technické informace stáhnout pdf (Strana 11)

OPERATION

Have questions? Call

800-USA-1-USA

(800-872-1872) or visit our website at www.ritron.com 8

ADDITIONAL FEATURES

The JMX “D-Series” handheld radios have other features

available through PC programming. See your Ritron dealer or

contact Ritron directly for PC programming of these options.

• Receive and Transmit Frequencies not contained in

Frequency Code Table 1, page 12.

• Wide or narrow band transmit operation can be set per

channel. Refer to the section FCC Narrowband Mandate

see if your radio is capable of wideband transmit operation.

Additional PC programmable features available to models

JMX-144D / 444D / 446D ONLY

include:

• Scan Channel Options include scan resume delay time,

busy channel blocking, last active channel beeps, and

priority scanning options.

• Squelch Tightener Receiver carrier squelch can be

adjusted UP or DOWN.

• Transmit Power (JMX-144D and JMX-444D Only)

• Transmit Time Out can be changed or disabled.

• Monitor Lock Out can be set to prevent monitoring of the

channel, only broadcasts with the correct QC or DQC code

can be heard.

• Transmit Inhibit on Busy Channel can be set to prevent

transmitting when a broadcast is present on the receiver

that does not carry the correct code.

• Receive Squelch Tone sounds at the end of each received

transmission.

• Transmit Clear To Talk Beep sounds after the PTT has

been pressed.

• Power Saver time can be set or disabled.

• Field Programming can be disabled.

• 4-Hour Inactivity Turn-Off The radio can be set to turn off

automatically if not used for over 4 hours.

• 2-Tone Encode and Decode The radio can be

programmed to send and receive 2-tone paging.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Žádné komentáře

Ritron " 6 " SERIES OUTPOST Technické informace Strana 11